When it comes to APDS and HESH as your only ammo options, you want RoF over caliber. is average but its not a bad tank, the vickers MBT its 100 times better tho so i dont see the point on spawning the conqueror first I already researched the Vickers MBT and Cent mk 10,they are both good tanks but lacking damage,I thought 120mm gun would do better. Media. download the APP - http://bit.ly/2eBj4VE CARNIVOROUS CAERNARVON - Bloody Good Tank (War Thunder Gameplay) Connect With me!! The IS-3 tank showed the Western Allies needed to reconsider their tank inventories, which at the time the IS-3 was introduced only composed of mostly M4 Shermans, M26 Pershings, and the Centurions.
In 1955, the basis of the Caernarvon was built into the first Conqueror tank. ϟ -Want Free GE? For those who don't know. This is not a problem with a tank like the Vickers which easily offset the low damage of APDS with a high RoF but with the Conqueror it takes 15sec to kill a tank with the second shot. The tank is slow, has weak side armor low RoF and APDS does little damage. On 03/04/2020 at 05:49, Miragen said: ... but the conqueror by far is the tank that suffers the most from it 1 Share this post. In real life, i'd honestly sit in a T-10M because of its overall performance as a tank, but in a deathmatch, these 3 Tanks could one-shot each other. In creating the Conqueror model, we have probably used all documents available that describe this tank. Link to post Share on other sites. T34 vs Caernarvon - War Thunder Official Channel.
That is the reason why the Conqueror doesn't do as much damage as M103 round would. Interests: War and Thunder. The British Conqueror tank has already been represented in several game projects involving military vehicles of the mid-20th century. If someone can take care of this and try luck against the mods, please, do it.
The Conqueror fires APDS a much lighter round designed for higher velocity and has more penetration than the M103's heavier AP round. The M103 tank was designed to counter the Soviet heavy tanks being produced at the time, ... Conqueror Mk 2 - British counterpart of the heavy tanks, using the same gun design. If someone can take care of this and try luck against the mods, please, do it. Several Caernarvon Mk.II's were rebuilt into Conqueror Mk. RoF = damage = hits = kills. 2 standards in between 1958 and 1959.
[attachment=188194:conqueror_armour_scheme1.jpg] [attachment=188195:shot 2016.02.19 22.37.21.jpg] As I said, all my posts related to Conqueror have been censored. Conqueror Armour Investigation. The Thunder of War. It's gun is the 'british' predecessor of the L11A5 (Chieftain), and i mean, we are talking about 120mm APDS and HESH here. Read also. Miss with the Conqueror and the tank has 15sec to get away. So this would be placed after the Conqueror MK II. The tank is also presented in War Thunder. Also, stuff; 5534 Report post; Posted April 6. Links to the articles on the War Thunder Wiki that you think will be useful for the reader, for example Now to the 'Super Conqueror' this suggestion is for a separate vehicle, not an upgrade. This Conqueror was to be given applique armour upon the upper plate and front of the turret. The M103 tank was designed to counter the Soviet heavy tanks being produced at the time, namely the IS-3 and the T-10M heavy tanks, which prove rather impervious to Western tank designs such as the M26 Pershing and Centurion. External links [Devblog] Steel Generals: ... About War Thunder Wiki; The British, recognizing the need of a bigger gun to fight the IS-3, started production on Conqueror tank. [attachment=188194:conqueror_armour_scheme1.jpg] [attachment=188195:shot 2016.02.19 22.37.21.jpg] As I said, all my posts related to Conqueror have been censored. These burster plates were spaced armour designed to reduce the effect of HESH and HEAT. Conqueror.